产品介绍

1. Installation method and steps:

       1. Inspection before installation: Check according to the packing list, and confirm that the accessories are complete.

       2. Glass tube installation:

       1) Carefully check two wooden boards with glass tubes and rulers. One of the glass tubes with a small interface is the board with glass tubes and rulers (1), and the other one is with glass tubes and rulers. Ruler's plank (2).

       2) Install the wooden board (1) with glass tube and ruler on the wall with an electric drill and expansion bolts (pay attention when installing, put the end of the glass tube with a small interface down), and the installation height is h≥50cm (see variable water head). Schematic diagram of the installation of the infiltration device). Then connect the wooden board (2) with the glass tube and the ruler to the wooden board (1) with the glass tube and the ruler, and install it on the wall.

       Note: It is recommended to remove the glass tube during installation, and then fix the glass tube on the wooden board after the installation of the board is completed to avoid the glass tube from being broken during installation.

       3. Installation of water supply bottle:

       1) Install the hook in the attachment at the appropriate position above the top of the glass tube board with an electric drill and expansion bolt.

       2) Install the water supply bottle faucet on the water supply bottle and hang the water supply bottle on the hook.

       4. Water pipe connection: use a hose and a three-way valve to connect according to the installation diagram of the variable head penetration device. (The hose connection length of the overflow hole and the exhaust hole can be determined according to the user's needs).

2. Configuration list